Home > News > Content

LCD Screen Lifter Installation

Guangzhou Junnan AV Tech Co.,Ltd | Updated: Mar 06, 2017
1. Unpack the package and be careful not to leave the power cord and warranty card in the box.

2. Must remove the shockproof screws, can only use the plum screwdriver, can not use electric equipment unloading. And then power up and down to determine the elevator is not damaged.

3. Before installing the monitor, first display the monitor on the opening of the elevator panel to see if it can be put in. Then fix the monitor on the elevator. Then the monitor down.

4. When installing the lifter into the conference table, keep in mind that you should not let the lifter hang the conference table. It is recommended to install, first in the desktop pad a layer of cardboard, a person standing on the table, the following people to lift the lifts to the table, by the people of the lift slowly into the hole, so lift Do not touch the desktop, to prevent scratches.

5. Then connect the power cord, with the remote control to a unified lift. Unified lift, if there is no lift, with reference to the instructions in the remote control bag, this platform to reduce the encoding, in order to be able to use a unified control of the remote control.